All You Need to Know About Safe Installation

It’s difficult, if not impossible, to find a replacement for particular items. Meanwhile, fireproof safes are an excellent way to keep your belongings safe in a break-in or natural disaster. And these things include jewelry, birth certificates, passports, and savings bonds.

Make sure the safe can withstand the heat of a fire before making this purchase. A keyed lock or a combination lock safe is an option, and you may hire professionals for safe installation in Greenwich, CT.

Installing a Safe in a House’s Basement

For any residential property, there’s no one-size-fits-all site. Every house has its character. So to keep your assets secure from theft, fire, and flooding, you may be pointed in the direction of various locations where a safe might be more appropriate.

In the Event of a Robbery

You may look and pick a spot in an area of the house that isn’t as frequently accessed as the rest of the property. It should be hidden from view and incorporated into the house’s construction. As such, a coat closet or guest room closet are good options. Meanwhile, closet safes are often concealed under built-in cabinets or behind a painted door to match the decor of the rest of the room.

If There Is a Fire

The second most significant danger to your house is a fire in Greenwich. So ideally, a safe should be placed where two exterior walls meet. With this, you get the maximum protection and support for a hefty safe. Meanwhile, the ground level is ideal for keeping children safe in a multi-story home. And also, make sure your house or condo’s emergency sprinkler system is located in an accessible area.

In the Event of a Flood

If you want to protect your belongings against flooding, ensure the safe is situated above the ground. The safe should be supported by a concrete or steel foundation if the location is prone to flooding. Anchoring the base to the house’s framework will maintain the safe at least two feet away from the ground. Also, consider using a waterproof container to keep precious items such as electronics or pictures. Besides, hire professionals for safe installation in Greenwich, CT.

A Safe in Your House: Preparing for the Installation

Tools like a socket set, a drill, drill bits, screwdrivers, and a marking pen are likely to be included in the installation instructions. For example, you may need to cut the carpeting to get to the underlayment. And before putting in your safe, ensure the location is thoroughly cleaned and ready.

Proper Setup on Concrete Surfaces

Open the safe’s door and secure it in place. Meanwhile, some pre-drilled holes may be seen in the base. Mark the spot where you’ll be drilling into the concrete using your marker, make sure your drill is ready with the right size bit according to the instructions, and then put the safe away. You’ll need to buy larger bolts and enlarge the pre-drilled holes inside the safe if you drill them too large.

Place the fastening kit’s raw plugs in the holes and the safe on top of them after the correct dimensions. Next, insert the bolts into your safe and anchor them to your concrete base.

Preventative Measures for Wooden Floor Installation

One must consider additional aspects to secure the safe to a wooden floor. The weight of a large safe cannot be supported by the floorboards alone. As a result, you’ll need to find a location for your safe that contains a floor joist.

To install on the wooden floor safely, you’ll need long coach bolts that extend deep enough into the floor joist to be secured with a nut. These may be purchased at a hardware store. However, you should consult a professional before gluing some safes, especially ones weighing more than 100 pounds.